Firmware

POPULAR MODES:
S19A 115 TH/s - 3850 watt (33 watt - TH/s)
S19A 125 TH/s - 4600 watt (37 watt - TH/s)
S19A 140 TH/s - 6100 watt (43 watt - TH/s)

STOCK BITMAIN FIRMWARE:
S19A 90 TH/s - 3100 watt (34 watt - TH/s)

• Release: 1.2.0 rc4

  Downloaded: 253

  Date: 12.08.2023

  Size of the firmware: 9.9 Mb

  Size of SD image: 14.3 Mb

  
  

  Hash Sum of the firmware: d066c036852e2595b754da00470a68d7

  Hash Sum of SD image: 17c0602a5a01740599e8ebc07b5c2bae

  
    Update download 1.2.0 rc4     Install SD download 1.2.0 rc4  

  What's new:

  Added:
  1. NEW AUTOTUNING - automatic tuning of all chips!
  2. Remote firmware installation on A113D (amlogic) control boards from micro USB;
  3. Remote installation of firmware on xilinx (Zylinx) and BB (BeagleBon) control boards without using SD cards directly to NAND;
  4. Support for miners Antminer S19J+;
  5. Support for miners Antminer S19L;
  6. Limit on the number of miner reboots in case of problems;
  7. Presets (set of automatic settings) for S19a Pro;
  
  Changed:
  1. Updated presets (set of automatic settings) for S19Pro Hydro, S19Pro+ Hydro;
  2. API speed optimization;
  
  Fixed:
  1. Working with Nicehash;
  2. Errors that led to the fall of the miner (error code: 11);
  3. An error that caused the miner to freeze;
  4. Improvements in the interface;
  
  Currently supported Antminers with control boards:
  A113D (amlogic) with micro USB;
  xilinx (Zylinx);
  BB (BeagleBon);
  Write directly to NAND memory without SD;
  
  Models:
  Antminer S19
  Antminer S19+
  Antminer S19 (88) xil-sd
  Antminer S19 (88) aml-nand
  Antminer S19 (126)
  
  Antminer S19 Pro
  Antminer S19 Pro A
  Antminer S19 Pro Hydro
  Antminer S19 Pro+ Hydro
  Antminer S19 Hydro
  
  Antminer S19A
  Antminer S19i
  Antminer S19L
  Antminer S19 XP xil-sd
  Antminer S19 XP aml-nand
  
  Antminer S19J
  Antminer S19J+
  Antminer S19J BB
  Antminer S19J Pro (xil-sd)
  Antminer S19J Pro (aml-nand)
  Antminer S19J Pro+
  Antminer S19J Pro+ BB
  Antminer S19J Pro A
  Antminer S19J Pro A BB
  Antminer S19J Pro BB
  
  Antminer T19
  
  Mass installation of firmware without SD cards, order via Telegram
  

  ---

• Release: 1.1.12

  Downloaded: 79

  Date: 07.02.2023

  Size of the firmware: 0.0 Mb

  Size of SD image: 0.0 Mb

  
  

  Hash Sum of the firmware:

  Hash Sum of SD image:

  
    Update download 1.1.12     Install SD download 1.1.12  

  What's new:

  New:
  1. Support for miners S19 (88), S19j Pro A, S19 XP;
  2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
  3. MAC addresses viewable from the dashboard;
  4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
  5. Ability to set the the startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit);
  6. Widgets are responsive now! 4k? 1080p? 480p? It all looks BEAUTIFUL;
  7. Voltage compensation based on the temperature and performance of the miner;
  8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
  9. EEPROM support for new miner models (Yes even those weird ones);
  10. Ability to remotely install firmware on AML and BB control boards for large customers. Xilinx - SOON;
  11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);
  
  Changed:
  1. Work with network settings (DHCP → Static);
  2. Pool Widget;
  3. Board Widget;
  4. Fonts and their adaptability;
  5. Expanded optimized interface mode;
  6. Location of alerts;
  7. Display firmware version Location (Bottom right);
  
  Bugs fixed:
  1. Fixed an issue that could occur while changing operation of pools by API;
  2. Operation of Reset/IP Report Buttons for AML Control Boards;
  3. Incorrect baud rate setting for 136x chips;
  4. Inability to generate a diagnostic report;
  5. Operating mode of the device without hashboards connected to it;
  6. Firmware error on some BB models;
  7. Issues with graph ranges not always returning to true value fixed;
  
  Currently supported:
  Antminer S19
  Antminer S19+
  Antminer S19A
  Antminer S19A Pro
  Antminer S19I
  Antminer S19J
  Antminer S19J BB
  Antminer S19J Pro
  Antminer S19 Pro A
  Antminer S19J Pro A BB
  Antminer S19J Pro BB
  Antminer S19 Pro
  Antminer S19(88)
  Antminer T19
  
  Pre-order v1.1.12
  Antminer S19j Pro aml
  Antminer S19 Pro aml
  Antminer S19j Pro BB aml
  Antminer S19 XP aml
  
  Telegram Pre-order
  

  ---

• Release: 1.1.11

  Downloaded: 91

  Date: 01.01.2023

  Size of the firmware: 0.0 Mb

  Size of SD image: 0.0 Mb

  
  

  Hash Sum of the firmware:

  Hash Sum of SD image:

  
    Update download 1.1.11     Install SD download 1.1.11  

  What's new:

  1) Ability to disable interface animation (This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
  2) Panel "quick" settings have been added;
  3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
  4) Fixed interface operation when accessed via https://;
  5) Improved support for mobile devices (Scaling issues resolved as well);
  6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
  7) Antminer S19+ support;
  8) Antminer S19i support;
  9) Support for Antminer S19 (with 88 chips);
  10) Antminer S19 Pro A support;
  11) Antminer S19j Pro A support;
  12) Support for new models of power supplies;
  13) Support for various hash board modifications Bitmain made;
  14) Fixed bugs leading to a restart of the miner;
  15) Improved polling of temperature sensors and chips;
  16) Support for the pause / resume function has been extended to the entire series of firmware;
  17) Currently supported: S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro, S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A

  ---

• Release: 1.1.9

  Downloaded: 195

  Date: 01.06.2022

  Size of the firmware: 0.0 Mb

  Size of SD image: 0.0 Mb

  
  

  Hash Sum of the firmware:

  Hash Sum of SD image:

  
    Update download 1.1.9     Install SD download 1.1.9  

  What's new:

  1) General stability, optimization and revision of the main drivers.

  ---

Chronology of changes by release.