ATTENTION: Firmware is working only with Antminers S19jPro Beagle Bone.
- Use SD card to install the firmware (not more than 16gb, FAT 32).
- Download the SD file for your version of S19jPro Beagle Bone control board (check your version on the white label of the control board cover), unzip and transfer all files to the SD-card.
- Insert the SD card with ASICDIP FIRMWARE and turn on the asic, if you pull out the SD card the BITMAIN firmware will return.
- If you need to update the version of ASICDIP firmware on the SD card which you are already using you need to download the firmware WEB file and use upgrade function in the firmware.
- If during overclock the consumption is higher than 4600 watts, it will be necessary UPGRADE BITMAIN POWER SUPPLY (check manual how to do it).
ATTENTION: see supplement to instructions (Bitmain_APW_12_modifications_ru). What are the control boards. How to solder the power supply.
Bitmain_APW_12_modifications_en
Types_control_boards
Firmware AntMiner S19jPro Beagle Bone Release 1.1.12
SD Image AntMiner S19jPro Beagle Bone Release 1.1.12
POPULAR MODES:
S19jpro-bb 125 TH/s - 3800 watt (30 watt - TH/s)
S19jpro-bb 140 TH/s - 4600 watt (33 watt - TH/s)
S19jpro-bb 170 TH/s - 6200 watt (36 watt - TH/s)
STOCK BITMAIN FIRMWARE:
S19jpro-bb 110 TH/s - 3300 watt (30 watt - TH/s)
Release: 1.1.12
Downloaded: 20
Date: 07.02.2023
Size of the firmware: 13.3 Mb
Size of SD image: 13.4 Mb
Hash Sum of the firmware: b9f8b036cdd864441a0e700b92b00f3c
Hash Sum of SD image: cdaabe5e6103105b4daf4b6c30e9810f
Download firmware release: 1.1.12
Download SD image release: 1.1.12
What's new:
New:
1. Support for miners S19 (88), S19j Pro A, S19 XP;
2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
3. MAC addresses viewable from the dashboard;
4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
5. Ability to set the the startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit);
6. Widgets are responsive now! 4k? 1080p? 480p? It all looks BEAUTIFUL;
7. Voltage compensation based on the temperature and performance of the miner;
8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
9. EEPROM support for new miner models (Yes even those weird ones);
10. Ability to remotely install firmware on AML and BB control boards for large customers. Xilinx - SOON;
11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);
Changed:
1. Work with network settings (DHCP → Static);
2. Pool Widget;
3. Board Widget;
4. Fonts and their adaptability;
5. Expanded optimized interface mode;
6. Location of alerts;
7. Display firmware version Location (Bottom right);
Bugs fixed:
1. Fixed an issue that could occur while changing operation of pools by API;
2. Operation of Reset/IP Report Buttons for AML Control Boards;
3. Incorrect baud rate setting for 136x chips;
4. Inability to generate a diagnostic report;
5. Operating mode of the device without hashboards connected to it;
6. Firmware error on some BB models;
7. Issues with graph ranges not always returning to true value fixed;
Currently supported:
Antminer S19
Antminer S19+
Antminer S19A
Antminer S19A Pro
Antminer S19I
Antminer S19J
Antminer S19J BB
Antminer S19J Pro
Antminer S19 Pro A
Antminer S19J Pro A BB
Antminer S19J Pro BB
Antminer S19 Pro
Antminer S19(88)
Antminer T19
Pre-order v1.1.12
Antminer S19j Pro aml
Antminer S19 Pro aml
Antminer S19j Pro BB aml
Antminer S19 XP aml
Telegram Pre-order
Release: 1.1.11
Downloaded: 26
Date: 01.01.2023
Size of the firmware: 16.0 Mb
Size of SD image: 16.1 Mb
Hash Sum of the firmware: 8c677d2ec23903376646f3f41a24d4cf
Hash Sum of SD image: f633933dea805e3b9ddb8e48f00223ff
Download firmware release: 1.1.11
Download SD image release: 1.1.11
What's new:
1) Ability to disable interface animation
(This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
2) Panel "quick" settings have been added;
3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
4) Fixed interface operation when accessed via https://;
5) Improved support for mobile devices (Scaling issues resolved as well);
6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
7) Antminer S19+ support;
8) Antminer S19i support;
9) Support for Antminer S19 (with 88 chips);
10) Antminer S19 Pro A support;
11) Antminer S19j Pro A support;
12) Support for new models of power supplies;
13) Support for various hash board modifications Bitmain made;
14) Fixed bugs leading to a restart of the miner;
15) Improved polling of temperature sensors and chips;
16) Support for the pause / resume function has been extended to the entire series of firmware;
17) Currently supported:
S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro,
S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A
Release: 1.1.9
Downloaded: 137
Date: 01.06.2022
Size of the firmware: 15.2 Mb
Size of SD image: 15.3 Mb
Hash Sum of the firmware: 0b6c4d924840cfc2115fc69986e305ac
Hash Sum of SD image: 9df9cd494c1e64157095f33c2676a16b
Download firmware release: 1.1.9
Download SD image release: 1.1.9
What's new:
1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer API commands available from local network.
Release: 1.1.7
Downloaded: 167
Date: 18.02.2022
Size of the firmware: 15.4 Mb
Size of SD image: 15.5 Mb
Hash Sum of the firmware: 61bd858693fc2a49f3beb17b67ec74d3
Hash Sum of SD image: c03bf9787bfc08bd1969a6aa141bbe7b
Download firmware release: 1.1.7
Download SD image release: 1.1.7
What's new:
1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer API commands available from local network.
Release: 1.1.3
Downloaded: 182
Date: 16.02.2022
Size of the firmware: 15.4 Mb
Size of SD image: 15.7 Mb
Hash Sum of the firmware: 37c69ad75dba31ada1249ff7ef387c1f
Hash Sum of SD image: e7d799e8c7968ebdf64dc4006933d585
Download firmware release: 1.1.3
Download SD image release: 1.1.3
What's new:
1) General stability, optimization and revision of the main drivers.
Chronology of changes by release.
Gallery
Installation and configuration in pictures.
Video
You can get acquainted with the advantages of the firmware and the main functions by watching the video:
Do you want to cooperate with us?
We offer our partners beneficial cooperation
Vnish offers special partnership terms for owners and administrators of large mining farms. For wholesalers, mining equipment and major repair services!
As a partner you will receive:
